Télécharger le livre :  Transient Effects in Simulations of Hybrid Electric Drivetrains
Ajouter à ma liste d'envies

Transient Effects in Simulations of Hybrid Electric Drivetrains


Florian Winke


This work presents an investigation of the influence of different modeling approaches on the quality of fuel economy simulations of hybrid electric powertrains. The main focus is on the challenge to accurately include transient effects and reduce the computation time of...

Parution : 2018-05-31
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  Analysis of Injection Processes in an Innovative 3D-CFD Tool for the Simulation of Internal Combustion Engines
Ajouter à ma liste d'envies

Analysis of Injection Processes in an Innovative 3D-CFD Tool for the Simulation of Internal Combustion Engines


Marlene Wentsch


Due to the large number of influencing parameters and interactions, the fuel injection and therewith fuel propagation and distribution are among the most complex processes in an internal combustion engine. For this reason, injection is usually the subject to highly...

Parution : 2018-05-16
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
73,84
Télécharger le livre :  Investigation of Correction Methods for Interference Effects in Open-Jet Wind Tunnels
Ajouter à ma liste d'envies

Investigation of Correction Methods for Interference Effects in Open-Jet Wind Tunnels


Oliver Fischer


Oliver Fischer analyzes the interference effects occurring in free-stream wind tunnels as well as their correction and simulation. With this work, the investigated correction method and the comparability of its results as well as flow simulation results are improved....

Parution : 2018-03-13
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  Micro Newton Thruster Development
Ajouter à ma liste d'envies

Micro Newton Thruster Development


Franz Georg Hey


Franz Georg Hey summarises the development and testing of a micro-Newton thrust balance, as well as the downscaling of a High Efficiency Multistage Plasma Thruster to micro-Newton thrust levels. The balance is tailored to fully characterise thruster candidates for the...

Parution : 2018-03-01
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  CMOS Readout Chips for Implantable Multimodal Smart Biosensors
Ajouter à ma liste d'envies

CMOS Readout Chips for Implantable Multimodal Smart Biosensors


Moustafa Nawito


Moustafa Nawito describes in detail the development process of a novel platform of Readout Integrated Circuits (ROICs), which enable the realization of miniaturized multi-parameter biomedical implants intended for long-term in-vivo monitoring. He presents new circuits...

Parution : 2017-11-22
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  Electronic Batch Recording Solutions
Ajouter à ma liste d'envies

Electronic Batch Recording Solutions


Monika Futschik


Monika Futschik introduces an evaluation model that allows a holistic assessment of the advantages and disadvantages of electronic batch recording solutions versus traditional paper batch ticket solutions. In comparison to former studies, this newly developed evaluation...

Parution : 2017-10-11
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  8th International Munich Chassis Symposium 2017
Ajouter à ma liste d'envies

8th International Munich Chassis Symposium 2017


Prof. Dr. Peter E. Pfeffer


You can find in this book the development of highly and fully automatic driving and the increasing electrification of the powertrain now face chassis development with new challenges too. Innovative chassis systems have to provide solutions for automated driving....

Parution : 2017-09-20
Format(s) : PDF
Éditeur : Springer Vieweg
Collection : Proceedings
J'achète
210,99
Télécharger le livre :  Silicon Anodization as a Structuring Technique
Ajouter à ma liste d'envies

Silicon Anodization as a Structuring Technique


Alexey Ivanov


Alexey Ivanov investigates the application of a silicon anodization process as a three-dimensional structuring technique, where silicon is transformed into porous silicon as a sacrificial layer or directly dissolved in electropolishing regime. The work contains a...

Parution : 2017-09-10
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  A Disaggregate Freight Transport Model for Germany
Ajouter à ma liste d'envies

A Disaggregate Freight Transport Model for Germany


Sascha Reiche


Sascha Reiche develops a multi-modal commodity class specific freight model at the level of firms for the area of Germany that allows integration of macroscopic as well as disaggregate input data. Three modes of transport and 30 types of goods at the spatial level of...

Parution : 2017-08-21
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
105,49
Télécharger le livre :  Handbook of Coil Winding
Ajouter à ma liste d'envies

Handbook of Coil Winding


Jürgen Fleischer , Jürgen Hagedorn , Florian Sell-Le Blanc


This book presents the current coil winding methods, their associated technologies and the associated automation techniques. From the introduction as a forming joining process, over the physical properties of coils, the semifinished products (wire, coil body,...

Parution : 2017-07-24
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
116,04
Télécharger le livre :  UR:BAN Human Factors in Traffic
Ajouter à ma liste d'envies

UR:BAN Human Factors in Traffic


Collectif


The UR:BAN MV project funded by the German Federal Ministry for Economic Affairs and Energy BMWi focused specifically on the user of future vehicle assistance and information systems. In the case of advanced driver assistance systems for urban areas, the primary...

Parution : 2017-06-22
Format(s) : PDF, ePub
Éditeur : Springer Vieweg
Collection : ATZ/MTZ-Fachbuch
J'achète
94,94
Télécharger le livre :  A Method to Identify Energy Efficiency Measures for Factory Systems Based on Qualitative Modeling
Ajouter à ma liste d'envies

A Method to Identify Energy Efficiency Measures for Factory Systems Based on Qualitative Modeling


Manuela Krones


Manuela Krones develops a method that supports factory planners in generating energy-efficient planning solutions. The method provides qualitative description concepts for factory planning tasks and energy efficiency knowledge as well as an algorithm-based linkage...

Parution : 2017-05-11
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
84,39
Télécharger le livre :  Combustion Engine Diagnosis
Ajouter à ma liste d'envies

Combustion Engine Diagnosis


Rolf Isermann


This book offers first a short introduction to advanced supervision, fault detection and diagnosis methods. It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel...

Parution : 2017-05-04
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
105,49
Télécharger le livre :  Complexity Management in Engineering Design – a Primer
Ajouter à ma liste d'envies

Complexity Management in Engineering Design – a Primer


Maik Maurer


The treatise supports understanding the phenomena of complexity in engineering, distinguishes complexity from other challenges and presents an overview of definitions and applied approaches.The historical background of complexity management is explained by highlighting...

Parution : 2017-02-21
Format(s) : PDF, ePub
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  Environmental Release of and Exposure to Iron Oxide and Silver Nanoparticles
Ajouter à ma liste d'envies

Environmental Release of and Exposure to Iron Oxide and Silver Nanoparticles


Henning Wigger


In this thesis a prospective approach was developed to identify and to assess current as well as potentially upcoming product applications with focus on environmental releases and exposures of engineered nanomaterials. The developed product application scenarios were...

Parution : 2017-01-09
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  Data-Driven Fault Detection for Industrial Processes
Ajouter à ma liste d'envies

Data-Driven Fault Detection for Industrial Processes


Zhiwen Chen


Zhiwen Chen aims to develop advanced fault detection (FD) methods for the monitoring of industrial processes. With the ever increasing demands on reliability and safety in industrial processes, fault detection has become an important issue. Although the model-based...

Parution : 2017-01-02
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
79,11
Télécharger le livre :  Information Fusion Under Consideration of Conflicting Input Signals
Ajouter à ma liste d'envies

Information Fusion Under Consideration of Conflicting Input Signals


Uwe Mönks


This work proposes the multilayered information fusion system MACRO (multilayer attribute-based conflict-reducing observation) and the µBalTLCS (fuzzified balanced two-layer conflict solving) fusion algorithm to reduce the impact of conflicts on the fusion result. In...

Parution : 2016-11-25
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  Plug-and-Play Monitoring and Performance Optimization for Industrial Automation Processes
Ajouter à ma liste d'envies

Plug-and-Play Monitoring and Performance Optimization for Industrial Automation Processes


Hao Luo


Dr.-Ing. Hao Luo demonstrates the developments of advanced plug-and-play (PnP) process monitoring and control systems for industrial automation processes. With aid of the so-called Youla parameterization, a novel PnP process monitoring and control architecture...

Parution : 2016-10-07
Format(s) : PDF
Éditeur : Springer Vieweg
J'achète
52,74
Télécharger le livre :  Grid Integration of Electric Mobility
Ajouter à ma liste d'envies

Grid Integration of Electric Mobility


Johannes Liebl


The UN Climate Change Conference in Paris, with its key topics of global warming and deteriorating air quality, will speed up the advance of electric mobility. CO2-neutral and zero-emission mobility require electricity to be generated from regenerative sources of...

Parution : 2016-08-24
Format(s) : PDF
Éditeur : Springer Vieweg
Collection : Proceedings
J'achète
147,69
Télécharger le livre :  7th International Munich Chassis Symposium 2016
Ajouter à ma liste d'envies

7th International Munich Chassis Symposium 2016


Prof. Dr. Peter E. Pfeffer


In chassis development, the three aspects of safety, vehicle dynamics and ride comfort are at the top of the list of challenges to be faced. Addressing this triad of challenges becomes even more complex when the chassis is required to interact with assistance systems...

Parution : 2016-08-15
Format(s) : PDF
Éditeur : Springer Vieweg
Collection : Proceedings
J'achète
210,99
<< < 5678 >

Restez informé(e) des événements et promotions ebook

Paiements sécurisés

Paiements sécurisés